Time for another update...It's June 2003, we've completed fixing the bottom three layers of the hull & we're half way through fixing the plywood to the hull sides. We have accomplished alot in the last 6 months & it's very encouraging to see an end in sight. At least if it is only the hull.

           All of the ply for the hull has been completed at this stage.

          Laminating the Deadwood

      Our router jig for scarfing.

        Deadwood scarf far left & Shear scarf on the right. (3 laminations...scarf is in the middle lamination.

   Epoxy time... 

   Our tongue & groove method for joining plywood sheets (9mm) in lieu of butt blocks.