June went very quickly. We have made good progress though as you can see in the photos below. The front windscreen framing has been fabricated as seen in the first 3 photos. The circular mount that can be seen infront of the windscreen is for the compass to sit in.

We have installed a tackle box (top) & bin hatch (below) in the port rear wall which will access the locker that resides under the stairs. (5th photo)

The last 3 photos are of the saloon roof sheeting. We have now finished the first layer & are in the process of gluing on the second & final layer. (9mm first layer - 7mm second layer All marine grade hoop pine)